Black Box LPS535A-SFP Media Converter

Transparently connect fiber to copper to power PoE+ devices at the edge of your network. Use the Converter to connect PoE+ devices such as PTZ (pan, tilt, zoom) cameras, 802.11n access points, VoIP phones, and more that require up to 30 watts of power. The Converter acts as a Power Sourcing Equipment (PSE) to push data and power over copper cable to the remote, Powered Devices (PDs).

The Media Converter features one autosensing 10/100/1000-BASE-T UTP port plus an SFP port that can be used for multimode and single-mode 1000BASE-X fiber connections. It is powered via an external AC adapter, which delivers 47 to 57 input power voltage.

The Converter features advanced functions such as auto-negotiation, Auto-MDIX, Link Lost Forwarding, and Link Fault Pass-Through for easy system management and troubleshooting. LEDs indicate Converter activity.

• Features one 10/100/1000Mbps copper port and one 1000BASE-X SFP port for single-mode and multimode fiber connections.
• Add PoE+ devices such as PTZ cameras, access points, IP phones, and more to your network.
• Acts as power sourcing equipment (PSE) on the copper side to provide up to 30 watts of power.
• Smart, plug-and-play installation. Add devices to your network without any reconfiguration.
• The copper port supports full-duplex, auto-MDI/MDI-X, and auto-negotiation.
• Link Loss Forwarding provides instant notification of fiber segment link problems.
• Compatible with 802.3 aF/at standard PoE devices.
• Warranty: 1 year, options for extension       

Controls — (1) DIP switch: ON: LLP/LFP enable; OFF: LLF/LFP disable

Connectors — (1) RJ-45; (1) 1000Base-X SFP-Slot

Indicators —
Power LED: ON when DC power is connected;
SFP Link/Act LED: ON when there is activity on the SFP link;
PSE: ON when a Powered Device (PD) is connected;
100M/ACT: ON when port is running at 100M speed and activity;
1000M/ACT: OFF when port is running at 1000M speed and activity

Standards —
IEEE 802.3 10BASE-T; IEEE 802.3u 100BASE-TX;
IEEE 802.3ab 1000BASE-T:
IEEE 802.3z 1000BASE-SX/LX:
IEEE 802.3at PoE+

Power —
Input: 100–240 VAC, 50–60 Hz, 0.8 A max.;
Output: 48 VDC, 0.8 A;
Consumption: 33 Watts maximum;
PoE+ output: 802.3at, up to 30 W

Dimensions —2.2H x 7.4W x 10.2D cm (0.9"H x 2.9"W x 4"D)

Weight —0.24 kg (0.53 lb.)

Environmental —
Temperature: Operating: 0 to 45° C (32 to 113° F); Storage: -20 to +85° C (-4 to 185° F);
Humidity: 10 to 90% relative, non-condensing

Approvals —FCC Class A, CE