Black Box LPS500A-MM-SC PoE PSE Gigabit Media Converter

Black Box Black Box

New

  • Converts 10-/100-/1000-Mbps copper to Gigabit Ethernet fiber (1000BASE-SX).
  • Supports links up to 550 meters (1804.4 ft.) on fiber side with 50/125-um, 500-MHz fiber.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

  • A low-cost, economical solution for powering PoE devices over the same CATx link used for data communications.
  • Powered device (PD) signature sending detects when a PoE device is connected.
  • Protects against damage caused by overcurrent events and offers undercurrent detection.
  • Link fault passthrough monitors both copper and fiber receive ports for loss of signal.
  • Far-end fault detection prevents the loss of valuable data from it being sent over an invalid link.
  • Supports 802.3x flow control on full-duplex ports and backpressure on 10BASE-T/100BASE-TX half-duplex ports.
  • Jumbo frame support (2 KB, normal mode; 9 KB, cut-through mode).
  • Copper port autonegotiates for network speed and features Auto MDI-X for easy cabling.
  • LEDs indicate when it is feeding PoE power as well as when power is interrupted.
  • RoHS compliant.

  • Converts 10-/100-/1000-Mbps copper to Gigabit Ethernet fiber (1000BASE-SX).
  • Supports links up to 550 meters (1804.4 ft.) on fiber side with 50/125-um, 500-MHz fiber.
  • Offers a maximum data transfer rate of 2000 Mbps (full-duplex).
  • Works as 802.3af power sourcing equipment (PSE) for Power over Ethernet (PoE) devices on the copper side.
  • Provides 48 VDC and 15.4 watts of power to two powered devices (PD) that comply with the 802.3af standard.
Operating Temperature 32 to 122°F (0 to 50°C)
Standards IEEE 802.3af (PoE), IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3z/ab (1000BASE-T), IEEE 802.3x full-duplex flow control, 1000BASE-SX
Distance (Maximum) UTP side: 100 m (328 ft.);
Fiber side (850-nm multimode): 62.5/125-µm: 160-MHz: 220 m (721 ft.); 200-MHz: 275 m (902.2 ft.); 50/125-µm: 400-MHz: 500 m (1640 ft.); 500-MHz: 550 m (1804.4 ft.)
CE Approval Yes
Connectors UTP side: (1) RJ-45 (10BASE-T/100BASE-TX/1000BASE-TX);
Fiber side: (1) pair of SC
Power Input: 100-240 VAC, 47-63 Hz;
Consumption (maximum): 24 W
Size 1.6"H x 6.2"W x 5.2"D (4.1 x 15.7 x 1.3 cm)
Weight 1.3 lb. (0.6 kg)

Part Code :

  LPS500A-MM-SC

Write a review

Black Box LPS500A-MM-SC PoE PSE Gigabit Media Converter

Black Box LPS500A-MM-SC PoE PSE Gigabit Media Converter

  • Converts 10-/100-/1000-Mbps copper to Gigabit Ethernet fiber (1000BASE-SX).
  • Supports links up to 550 meters (1804.4 ft.) on fiber side with 50/125-um, 500-MHz fiber.