Black Box LPS500A-SM-10K-SC PoE PSE Gigabit Media Converter

PoE PSE Media Converters not only enable you to connect copper cables to long-distance fibre data links, they also safely power compatible PoE devices on the copper side. Fully compliant with the 802.3af Power over Ethernet (PoE) standard, the converters function as power source equipment (PSE) to provide -48 VDC power via copper wiring to access points, cameras and similar devices in areas without nearby power outlets.

For equipment protection, PoE PSE Media Converters offer overcurrent and undercurrent detection, as well as fault protection input and power monitoring. They also have powered device signature sensing to detect when a 802.3af compliant device is connected downstream.

Plus, link-fault passthrough and far-end fault detection features keep you from sending valuable data across invalid links by alerting you to 'silent failures' on the fibre side.

• Get powered, and extend your network up to 20 kilometers over fiber.
• PoE PSE or PoE PD according to 802.3af.
• Convert 10/100Mbps copper cabling to 100Mbps fiber optic cabling.
• Undercurrent and over-current detection and load sensing.

Flow control — 802.3x for full duplex; backpressure for half-duplex
PoE Type — 802.3af Power Source Equipment
Standards — IEEE 802.3u 10BASE-T/100BASE-TX, 100BASE-FX/100BASE-LX; IEEE 802.3z/ab 1000BASE-T; IEEE 802.3af Power over Ethernet
Connectors Rate — Copper: (1) RJ-45; Fibre: LPM600A, LPM602A, LPS500A-MM-SC, LPS500A-SM-10K-SC: (1) pair of SC; LPM601A, LPM603A: (1) pair of ST; LPM605A, LPS500A-MM-LC, LPM606A—LPM607A: (1) SC
Power — Input: 100-240 VAC, 50-60 Hz, autosensing; Consumption: 24 watts
Operating Temperature — 0 to 50°C
Operating Humidity — 5 to 90%
Dimensions — 4.1(H) x 15.9(W) x 13.3(D) cm
Weight — 1.2 kg