HP JG237A 5120-48G-PoE+ EI Switch with 2 Interface Slots

HPE HPE

New

The HPE 5120 EI Switch Series delivers flexibility, scalability, and low total cost of ownership (TCO) with a robust feature set supporting stacking, static layer 3 routing, PoE+, ACLs, and IPv6. Hewlett Packard Enterprise (HPE) Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity.

 


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The HPE 5120 EI Switch Series delivers flexibility, scalability, and low total cost of ownership (TCO) with a robust feature set supporting stacking, static layer 3 routing, PoE+, ACLs, and IPv6. Hewlett Packard Enterprise (HPE) Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity.

The HPE 5120 EI Switch Series can be managed with the HPE Intelligent Management Center (IMC) for a single view of your network.

Scalable and Secure Access Layer Switches

  • The HPE 5120 EI Switch Series supports stacking, static layer 3 routing, PoE+, ACLs, and IPv6. HPE Intelligent Resilient Fabric (IRF) technology creates a virtual fabric which increases network resilience, performance, and availability while reducing operational complexity.
  • HPE 4-chassis IRF for simpler, flatter, more agile networks, and flexible deployment with longer-distance stacking between closets up to 70 km.
  • Modular 10GbE uplinks (CX4, SFP+ and 10GBASE-T), stacking and power supplies allow for future upgradability.
  • External redundant power supply for increased reliability.
  • Limited Lifetime Warranty and no software licensing required.

Powerful Quality of Service (QoS)

  • The HPE 5120 EI Switch Series supports advanced, classifier-based QoS which directs traffic using multiple match criteria based on Layer 2, 3, and 4 information. The switches apply QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.
  • Traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), SP+WRR, and traffic policing with Committed Access Rate (CAR) and line rate.

Comprehensive Security Control

  • The HPE 5120 EI Switch Series supports flexible authentication methods including 802.1X, and MAC and Web for greater policy-driven application security.
  • This series uses access control lists (ACLs) to provide IP Layer 2 to Layer 4 traffic filtering. And it supports global ACL, VLAN ACL, port ACL, and IPv6 ACL.
  • Source-port filtering, RADIUS/TACACS+, SSL, Port Security, and MAC address lockout deliver enhanced security.

Single View of the Network

  • The HPE 5120 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
  • RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

Differentiator
HP 5120-48G-PoE+ EI Switch with 2 slots (48 10/100/1000Base-T PoE+ ports, 4 10/100/1000Base-T or SFP dual-personality ports and 2 extension slots)

Ports
(44) RJ-45 autosensing 10/100/1000 PoE+ ports
(4) dual-personality ports - PoE+ autosensing 10/100/1000BASE-T or SFP
(2) port expansion module slots
Supports a maximum of 48 autosensing 10/100/1000 ports

Memory and processor
128 MB SDRAM
Packet buffer size: 4 MB
16 MB flash

Latency
1000 Mb Latency: < 3.2 µs
10 Gbps Latency: < 2.6 µs

Throughput
up to 142.9 Mpps
Routing/switching capacity
192 Gbps
PoE capability
370 W PoE+
Stacking capabilities
IRF
4 switches

Management features
IMC - Intelligent Management Center
Command-line interface
Web browser
SNMP manager

Dimensions (W x D x H)
(43.99 x 42.01 x 4.37 cm)

Weight
(7.5 kg)

(1) HP 5120-48G-PoE+ EI Switch with 2 Interface Slots

Part Code:

JG237A

Write a review

HP JG237A 5120-48G-PoE+ EI Switch with 2 Interface Slots

HP JG237A 5120-48G-PoE+ EI Switch with 2 Interface Slots

The HPE 5120 EI Switch Series delivers flexibility, scalability, and low total cost of ownership (TCO) with a robust feature set supporting stacking, static layer 3 routing, PoE+, ACLs, and IPv6. Hewlett Packard Enterprise (HPE) Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity.