Black Box LPB201A PoE L2 Managed 10/100 Switch with (2) Dual-Media SFP Ports

Condition: New

PoE L2 Managed 10/100 Switch with (2) Dual-Media SFP Ports, (24) 10BASE-T/100BASE-TX Ports and (24) 10BASE-T/100BASE-TX Ports

Powers 24 PoE devices such as wireless APs & network cameras.
Fully manageable via Web browser or SNMP .
Extensive VLAN and QoS capabilities.
Secure with VLAN, Q-in-Q traffic isolation, access control group isolation.

Broadcast Storm	Multicast/Broadcast/Unknown-Unicast Storm suppression
Buffer	Packet: 256 KB; Control: 128 KB
Environmental	Operating temperature: 32 to 104° F (0 to 40° C); Humidity: 5 to 90%, noncondensing
MAC Addresses	8K
Management	SNMP v1, v2c; MIB-II; RMON MIB
Port Mirroring	Support for 1:N RX port mirroring; Port sniffer: TX Monitor Mode, RX Monitor Mode, and TX-RX Pair Monitor Mode
QoS Supported	Port-based (VIP port); 802.1p, IP TOS and Diffserv (IP v.4/v.6) based packet classification; with four-level priority queues to prioritize inbound and outbound traffic; WRR and strict scheduling; priority in a Q-in-Q tag
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1q, IEEE 802.1w, ANSI/IEEE 802.3 autonegotiation
Switching Capacity	Non-blocking, wire-speed performance; maximum throughput of 8.8 Gbps
VLAN Capabilities	Port-based VLANs; IEEE 802.1q tag-based VLANs, up to 256 active VLANs; Q-in-Q for enabling subscriber aggregation
CE Approval
Connectors	Twisted-pair ports: (24) RJ-45; SFP dual-media ports: (2) SFP/RJ-45
Indicators	LEDs: Per Unit: (1) CPURUN, (1) POWER, (1) ACT, (1) FDX, (1) SPD; Per 10/100 Port: (1) LNK, (1) ACT/FDX/SPD, (1) PoE-PSE ACT; Per 10/100/1000 Fiber Port: (1) LNK, (1) FX, (1) ACT/FDX/SPD
Input: 100-240 VAC, 50-60 Hz, autosensing; Output: PoE with 48 VDC power through RJ-45 Pins 1, 2, 3, and 6; 185 watts of total power up to 7.7 watts for 24 ports
Size	1.75"H (1U) x 17.4"W x 13.2"D (4.4 x 44.2 x 33.5 cm)
Weight	7.3 lb. (3.3 kg)