Aruba 500 Series Wireless Access Points

Aruba Aruba

New

The Aruba 500 series access points, with Wi-Fi 6 (802.11ax) technology and Aruba’s intelligent software innovations, deliver high performance connectivity for mobile and IoT devices in any environment.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The Aruba 500 series access points, with Wi-Fi 6 (802.11ax) technology and Aruba’s intelligent software innovations, deliver high performance connectivity for mobile and IoT devices in any environment.The 500 series is designed to simultaneously serve multiple clients and traffic types in dense environments, and boosts overall network performance by up to 400% compared to 802.11ac APs.The 500 Series also provides differentiated capabilities that include AI-powered RF optimization, Live upgrades, WPA3 and Enhanced Open certified security, and unified wired and wireless policy with Dynamic Segmentation.Additionally, Green AP energy savings are available when Aruba’s AI/ML capabilities are enabled.

  • 1.77 Gbps of maximum throughput
  • WPA3 and Enhanced open security
  • Built-In technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices
  • Orthogonal Frequency Division Multiple Access (OFDMA) and Multi-User Multiple-Input, Multiple-Output (MU-MIMO) for enhanced multi-user efficiency
  • IoT Ready Bluetooth 5 and Zigbee support
Reliability
    Mean Time Between Failure (MTBF): 1.3Mhrs (148yrs) at +25°C operating temperature
Mounting Details A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the Aruba mount kits (sold separately); see the ordering Information section below for details.
Environmental Specifications
  • Operating conditions
    • Temperature: 0°C to +50°C / +32°F to +122°F
    • Humidity: 5% to 93% non-condensing
    • AP is plenum rated for use in air-handling spaces
    • ETS 300 019 class 3.2 environments
  • Storage and transportation conditions
    • Temperature: -40C to +70C / -40F to +158F
    • Humidity: 5% to 93% non-condensing
    • ETS 300 019 classes 1.2 and 2.3 environments
Mechanical Specifications
  • Dimensions/weight (AP-505; unit, excluding mount bracket):
    • 160mm (W) x 161mm (D) x 37mm (H)
    • 500g
  • Dimensions/weight (AP-515; shipping):
    • 193mm (W) x 183mm (D) x 63mm (H)
    • 645g
Power Sources and Power Consumption
  • The AP supports direct DC power and Power over Ethernet
  • When both DC and PoE power sources are available, DC power takes priority over PoE units
  • Power sources are sold separately; see the 500 Series Ordering Guide for details
  • When powered by DC or 802.3at (class 4) PoE, the AP will operate without restrictions units
  • When powered by 802.3af (class 3) PoE and with the IPM feature disabled, the AP will disable the USB port. In the same configuration but with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the PoE budget and actual power. The feature restrictions and order can be programmed.
  • Maximum (worst-case) power consumption (without / with a USB device attached):
    • DC powered: 8.9W / 14.2W
    • PoE powered (802.3at): 11.0W / 16.5W
    • PoE powered (802.3af): 11.0W / 13.5W
    • This assumes that up to 5W is supplied to the attached USB device
  • Maximum (worst-case) power consumption in idle mode: 4.3W (DC) or 6.1W (PoE).
  • Maximum (worst-case) power consumption in deep-sleep mode: 1.7W (DC) or 3.3W (PoE).

Part Code

Internal antenna access points

R2H25A

R2H26A

R2H27A

R2H28A

R2H28ACM

R2H29ACM

R2H29A

External antenna access points

R2H19A

R2H20A

R2H21A

R2H22A

R2H23A

Write a review

Aruba 500 Series Wireless Access Points

Aruba 500 Series Wireless Access Points

The Aruba 500 series access points, with Wi-Fi 6 (802.11ax) technology and Aruba’s intelligent software innovations, deliver high performance connectivity for mobile and IoT devices in any environment.