NTI ST-C6USBHU-300 HDMI USB KVM Extender

• Transmits all signals over one CAT5/6/7 cable.
• Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
• HDMI features supported:
  • 12-bit Deep Color
  • x.v.Color
  • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS
  • Bandwidth up to 225 MHz (6.75 Gbps)
  • Support for CEC (consumer electronic control) compatible devices.
  • Lip Sync
• HDCP compliant.
• Supports the DDC2B protocol.
• Available with optional IR control and/or additional USB 2.0 (low/full speed) port.
  • Full IR control of HDMI source from remote HDTV using existing source remote control.
  • For the additional USB port on the remote unit, use to connect a USB touch screen monitor, interactive whiteboard, or CAC card reader.
• High quality, rugged steel construction with durable powder coat finish.
• Keyboard and mouse are hot-pluggable.
• Keep-alive keyboard/mouse emulation for flawless operation.
• Only one power supply is necessary to power both the local and remote units

Local Unit

• Supports a USB computer (PC, SUN, MAC) with HDMI video.
• Multiplatform support: Windows 2000/XP/Vista/7, Windows Server 2000/2003/2008, Solaris, Linux, FreeBSD and MAC OS 9/10.
• One female HDMI connector.
• One female USB Type B connector.
• Optional IR extension support: one female 3.5mm port for IR emitter.
• One female RJ45 port for sending/receiving high definition video/audio, USB, IR, CEC, and DDC signals.

Remote Unit

• Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
• Supports embedded digital audio.
• Auto equalization for different lengths of CAT5e/6/7 cable.
• One female HDMI connector.
• Two female USB Type A connectors.
• Compatible with most USB keyboards and mice, including Logitech M570 wireless mouse and Logitech K400 wireless keyboard.
• Optional IR extension support: one female 3.5mm port for IR receiver.
• Available with an optional female USB Type A connector for an additional USB 2.0 (low/full speed) device – USB touch screen monitor, CAC card reader, interactive whiteboard, or barcode scanner.One female RJ45 port for sending/receiving high definition video/audio, USB, IR, CEC, and DDC signals.
  • USB maximum data rate: 12 Mbps.
  • Supported touch screen monitors: Microtouch 3M, ELO 1529L 3000 Series, Smart Podium ID422w, Hope Industrial HIS-RL17, NEC MultiSync E222W, Industrial Electronic Devices Inc IWS-240t-G3, Zytronics CML-170, Pulse IR TSV4001/DT40 and HP Compaq.
  • Supported interactive whiteboards: SMART Board™ SB640
  • Supported card readers: Athena, Cherry, Gemalto, Generic USB, and Dell smart card/keyboard combo.

Dimensions

• WxDxH(in): 3.09x3.49x1.08

Power

• Powered from a single power supply attached to either the local or remote unit.
• Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)

Cables

• 3-foot HDMI male-to-male cable included.
• 1-meter male USB Type A to male USB Type B cable included.
• Use HD-xx-MM cable to connect an HDMI display.
• Use DVI-HD-xx-MM cable to connect a DVI source or display.
• Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
• Use CAT6A-xxx-BLUE-SOL23-FA CAT6a 750 MHz Solid Unshielded Patch Cable or CAT6A-BULK23-BLUE-NPC CAT6a 750 MHz Solid Unshielded Bulk Cable terminated with 6A-PLG-SH-BFA CAT6a Shielded Field Assembly RJ45 Connectors for the best performance at 1080p resolution.
• ST-C6USBH(U)-IR-300: IR transmitter/receiver included.

Environmental

• Operating temperature: 32 to 122°F (0 to 50°C).
• Storage temperature: -20 to 140°F (-30 to 60°C).
• Operating/storage relative humidity: 17 to 90% non-condensing RH.

Regulatory Approvals

• CE, RoHS
• TAA compliant
• EN51055, EN50121-3-2

Warranty

• Two years

Part Code:

 ST-C6USBHU-300