Cyber Power PDU20MHVCEE10AT Metered

Cyber Power Cyber Power

New

The Automatic Transfer Switch CyberPower provides power redundancy with complete computer hardware equipped with a single power supply. This system is capable of transferring power from a computer equipment to another source in order to maintain a perfect operation in the event of failure of the original source. This feature allows to raise the level of protection of equipment that is not fitted to the base of a redundant power supply.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The Automatic Transfer Switch CyberPower provides power redundancy with complete computer hardware equipped with a single power supply. This system is capable of transferring power from a computer equipment to another source in order to maintain a perfect operation in the event of failure of the original source. This feature allows to raise the level of protection of equipment that is not fitted to the base of a redundant power supply.

The input and output levels of the ATS is configurable, enabling it to large scenarios. The ATS is equipped with a multifunction LCD display, allowing local management and real-time monitoring. So you can monitor and configure the load in order to avoid overloads and effectively balance the consumption levels.

Through the Web, using the SNMP / HTTP and Telnet, you can remotely control the output jacks so power cycle equipment. ** Optional on Series Measured

  • Double entrance with automatic detection and switching
  • Status Indicator LED
  • Multifunction display
  • Input voltage and configurable Load Rating
  • Event logs **
  • Automatic event notification **
  • PowerPanel® Business Edition **
  • Remote Management SNMP / HTTP **
  • Optional on Series ** Measured
Model PDU20SWHVIEC8FNET
Category (Measured or Controlled) Measured
Entrance
Nominal input voltage 200V / 240V
Frequency 50Hz/60Hz
Maximum Input Current 20A (Derated to 16A)
Plug Type 2 x IEC 309 16A
Output
Nominal Output Voltage 200V - 240V
No. of output taken branches 1
No. shots Total 10
Outlet Type IEC-320 C13
Information on the LCD display KW, Tension, Courant, Info Réseau, Version H/W & F/W
LED lights Input , output load
Transfer Time 8-12mS (typical)
Management & Communications
SNMP / HTTP Remote Monitoring TCP/IP, UDP, DHCP, SNMP, HTTP
Connectivity RJ45, DB9/RS232
Physical
Dimensions (HxWxD) mm 44 x 433 x 236
Rack Size 1U
Weight (kg) 7.4
Style Rackmount, Vertical Rackmount, Under-Counter
Form Factors Supported 1U rackmount, 0U vertical rackmount, undercounter installation supported
Cord Retention Tray/Cord Organizers Yes
Adjustable Mounting Brackets 2 set(L-short/L-long)
External Site Ground Pin Yes
Environmental
Operating Temperature 0°C to 45°C
Operating Humidity 0% - 95% non-condensing
Maximum Operating Elevation 4,500 m
Certifications
Certifications UL60950_1 , CSA C22.2, FCC Class A, CE, C-tick
ROHS ROHS Compliant

Part Code:

PDU20MHVCEE10AT

Write a review

Cyber Power PDU20MHVCEE10AT Metered

Cyber Power PDU20MHVCEE10AT Metered

The Automatic Transfer Switch CyberPower provides power redundancy with complete computer hardware equipped with a single power supply. This system is capable of transferring power from a computer equipment to another source in order to maintain a perfect operation in the event of failure of the original source. This feature allows to raise the level of protection of equipment that is not fitted to the base of a redundant power supply.