StarTech 110VDSLEXT VDSL2 Ethernet Extender Kit over Single Pair Wire 110VDSLEXT

StarTech StarTech

New

The 110VDSLEXT VDSL Ethernet extender kit lets you span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity, allowing you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The 110VDSLEXT VDSL Ethernet extender kit lets you span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity, allowing you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.

A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference.

  • IEEE 802.1Q VLAN tag transparent
  • Selectable CPE and CO mode via DIP switch
  • Supports flow control for Fast Ethernet (pause frame or Back Pressure)
  • Allows you the ability to select fixed SNR margin (9 dB) or fixed target data rate
  • Light in weight and a very compact design
  • Supports both symmetric and asymmetric transmission
Warranty Information
Warranty 2 Years
Hardware
Industry Standards IEEE 802.3/802.3u/802.3x 10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X
On-board surge protection
VDSL2 ITU-T G.993.2, VDSL ITU-T G.993.1, and VDSL2/VDSL ITU-T G.997.1 compliant
Performance
Max Distance 1 km (0.6 mi)
Maximum Data Transfer Rate 0m - 100Mbit/s
300m - 75Mbit/s
1km - 10Mbit/s
Connector(s)
Local Unit Connectors 2 - RJ-45 Female
Remote Unit Connectors 2 - RJ-45 Female
Special Notes / Requirements
Note You have the ability to use up to four sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (Up to two sets only over standard Cat5).
Physical Characteristics
Color Black
Product Height 0.9 in [22 mm]
Product Length 3.7 in [95 mm]
Product Weight 3.2 oz [90 g]
Product Width 2.8 in [72 mm]
Indicators
LED Indicators 3 - LAN: ACT/LNK, 10/100 Mbps, Half/Full Duplex
3 - VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
Power
Output Voltage 12 DC
Power Source 2 AC Adapters Included
Environmental
Humidity 10~90% RH
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature 0°C to 70°C (32°F to 158°F)
Packaging Information
Shipping (Package) Weight 2.1 lb [0.9 kg]
  • 1 - Ethernet VDSL Extender
  • 1 - Ethernet VDSL Receiver
  • 2 - RJ-45 to VDSL Cable
  • 2 - Power Adapter
  • 1 - Instruction Manual

Part Code:

110VDSLEXT

Write a review

StarTech 110VDSLEXT VDSL2 Ethernet Extender Kit over Single Pair Wire 110VDSLEXT

StarTech 110VDSLEXT VDSL2 Ethernet Extender Kit over Single Pair Wire 110VDSLEXT

The 110VDSLEXT VDSL Ethernet extender kit lets you span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity, allowing you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.