Data Center Infrastructure Management (DCIM) is a category of solutions which were originally created to extend the traditional data center management function to include all of the physical assets and resources found in the facilities and IT domains. DCIM deployments over time were supposed to integrate information technology (IT) and facility ...
Data Center Infrastructure Management (DCIM) is a category of solutions which were originally created to extend the traditional data center management function to include all of the physical assets and resources found in the facilities and IT domains. DCIM deployments over time were supposed to integrate information technology (IT) and facility management disciplines to centralize monitoring, management and intelligent capacity planning of data centers' critical systems. Since DCIM is a broadly used term which covers a wide range of data center management values, each deployment will include a subset of the full DCIM value needed and expected over time.
LessThis sensor enables the Geist Climate Monitor to monitor DC low-voltage systems. Using logs and graphs provided by the Geist Climate Monitor you can remotely check on the status of the system. Find out if the batteries are being overcharged or not charged enough.
The GT3HD digital sensor collects and transmits real-time temperature, humidity and dew point data to protect critical data center equipment from heat and moisture.
The Isolated Voltage Sensor, in combination with a Geist Climate Monitor, allows you to track and monitor DC voltages used in battery-backup and telecom systems.
The Power Failure Sensor is an analog sensor that enables a Geist Climate Monitor to detect line voltage and send an alert through email or SNMP trap if power is lost. This provides time to either restore power or properly shutdown the system before backup power is exhausted.
Geist's door position sensor helps you keep track of whether data center doors are open or closed. You can use a web interface to check the position of the door, or an alarm can be set to provide you with an alert whenever a secure door is opened. Consisting of two main components - a magnet and a switch with terminals connecting the signal wires - the...
Photoelectric Smoke Alarm for 120VAC/9VDC and 220VAC/9VDC Single or Multiple (Tandem) Station and Specialty Applications
The SD2 is a low-voltage smoke detector with a built-in dry-contact relay output, suitable for use with any Geist environmental or power + environmental monitoring unit equipped with analog-sensor inputs. Comes pre-wired with a 12VDC power supply and a 25ft (7.6m) length, 2-conductor alarm wire for easy installation.
As with all Watchdogs, the Watchdog 100 allows users to keep an eye on remote conditions from a secure web interface and receive SNMP, e-mail, text message (via your carrier's email-to-SMS gateway) and voice call* alert notifications when user-specified thresholds are breached.
The Watchdog 1200 and Watchdog 1250 provide Web-based remote surveillance of temperature, relative humidity, dew point, airflow, light, sound and additional sensors connected to the unit. Configure SNMP, Email, and Email-to-SMS alerts when user-specified thresholds are breached.
The Watchdog 15 / 15-P is a self-contained unit with on-board temperature and humidity/dew point sensors. It has an input capacity of four external sensors. SNMP, Email & SMS Alerts Trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c), email and SMS messages (email to SMS gateway). For example,...
Raritan AMS-42 – Asset Management Sensor kit for 42U height rack. 1 connector and 1 RGB LED per U space
Raritan AMS-45 – Asset Management Sensor kit for 45U height rack. 1 connector and 1 RGB LED per U space
Raritan AMS-46 – Asset Management Sensor kit for 46U height rack. 1 connector and 1 RGB LED per U space
Raritan AMS-47 – Asset Management Sensor kit for 47U height rack. 1 connector and 1 RGB LED per U space
Raritan AMS-48 – Asset Management Sensor kit for 48U height rack. 1 connector and 1 RGB LED per U space
Raritan AMS-48 – Asset Management Sensor kit for 48U height rack. 1 connector and 1 RGB LED per U space
Branch Circuit Monitor allows monitoring of 400V 3P Mains lines and 21 Branch circuits. Ethernet, serial, USB-A, USB-B and sensor connections. No Mains or Branch CT's included
Branch Circuit Monitor Main BCM Unit 3X250AMP CT + 21 60A Branch 3Ph CE
Branch Circuit Monitor Main BCM Unit 3X250AMP CT + 21 100A Branch 3Ph CE
Branch Circuit Monitor Split Cores, Includes 3x 250A Mains Split-core CTs, CE Rated
Branch Circuit Monitor Split Cores, Includes 21x 60A Mains Split-core CTs, CE Rated
Raritan D2CIM-PWR Remote Power Control - The Raritan Dominion D2CIM-PWR is a Computer Interface Module or CIM for remote powerstrip.
Single airflow sensor - 10 ft (3 m) cable length - RJ12 connector
Loading...