MOXA NPort 5610-8-DT/NPort 5650-8-DT Series

1 Review(s)
Moxa Moxa

New

NPort® 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort® 5600-8-DT device servers have a smaller form factor compared to our 19" models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

Convenient Design for RS-485 Applications

The NPort® 5650-8-DT device servers support selectable 1K-ohm and 150K-ohm pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs

The NPort® 5650-8-DT device servers support both a power terminal block and power jack for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adaptor.

LED Indicators to Ease Your Maintenance Tasks

The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Two Ethernet Ports for Convenient Cascade-style Wiring

The NPort® 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.

Automatic Warning Function by Speaker and/or E-mail

The built-in speakers can be used to alert administrators of problems with the Ethernet links or power input. The web console indicates which Ethernet link or power input has failed. An e-mail warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.

  • 8 serial ports supporting RS-232/422/485
  • Compact desktop design
  • 10/100M auto-sensing Ethernet
  • Built-in 15 KV ESD protection for all serial signals
  • Easy IP address configuration with LCD panel
  • Choice of configuration methods: Web console, Telnet console, and Windows utility
  • Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
  • SNMP MIB-II for network management
  • Supports Moxa's MXview industrial network management software via the MXview Plug-in

 

Ethernet Interface
Number of Ports 2 (1 IP)
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
Serial Interface
Number of Ports 8
Serial Standards NPort 5610-8-DT: RS-232 
NPort 5650-8-DT: RS-232/422/485
Connector NPort 5610-8-DT/5650-8-DT/5650I-8-DT: DB9 male 
NPort 5610-8-DT-J/5650-8-DT-J: RJ45 (8 pins)
Serial Line Protection 15 KV ESD protection for all signals 
2 KV isolation protection (NPort 5650I-8-DT only)
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 KΩ, 150 KΩ
Terminator for RS-485 120 Ω
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate 50 bps to 921.6 Kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217
Configuration Options Web Console, Telnet Console, Serial Console, Windows Utility
Windows RealCOM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers Linux kernel 2.4.x, 2.6.x, 3.x
Mini Screen with Push Buttons
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal, IP30 protection
Weight NPort 5610-8-DT: 1760 g 
NPort 5610-8-DT-J: 1710 g 
NPort 5650-8-DT: 1770 g 
NPort 5650-8-DT-J: 1710 g 
NPort 5650I-8-DT: 1850 g
Dimensions Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in) 
With ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in) 
With DIN-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption NPort 5610-8-DT:
  611 mA @ 12 V, 300 mA @ 24 V, 140 mA @ 48 V
NPort 5610-8-DT-J:
  611 mA @ 12 V, 300 mA @ 24 V, 140 mA @ 48 V
NPort 5650-8-DT:
  615 mA @ 12 V, 300 mA @ 24 V, 156 mA @ 48 V
NPort 5650I-8-DT:
  1066 mA @ 12 V, 510 mA @ 24 V, 200 mA @ 48 V
NPort 5650-8-DT-J:
  615 mA @ 12 V, 300 mA @ 24 V, 156 mA @ 48 V
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC CE, FCC
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024
Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) 163,356 hrs
 Warranty
Warranty Period 5 years
Details See http://www.moxa.com/support/warranty.htm

Part Code:

NPort 5610-8-DT
NPort 5610-8-DT-J
NPort 5650-8-DT
NPort 5650-8-DT-J
NPort 5650I-8-DT

Grade 
02/16/2016

Good Deal

Reasonable price product.

Write your review! !

Write a review

MOXA NPort 5610-8-DT/NPort 5650-8-DT Series

MOXA NPort 5610-8-DT/NPort 5650-8-DT Series

NPort® 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort® 5600-8-DT device servers have a smaller form factor compared to our 19" models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.