ATEN PN9108U Power over the NET™

Condition: New

The PN9108 Power over the NET™ is a control unit that provides remote power management for eight AC outlets via a TCP/IP connection, allowing administrators to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world.The PN9108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.

Remote power on / off / reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet port
Local power on / off / reboot control via the PN9108’s RS-232 port to the computer’s RS-232 port
Daisy chain up to 15 additional stations to control up to 128 outlets
Manual switching between Local and Remote access for each port via front panel push button switches
Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
Easy setup and operation via a browser interface
Provides three configuration/management methods: Browser; Telnet; or Console Terminal
Safe shutdown and rebooting for Windows systems*
Overcurrent protection and recovery for each AC port (110 V model only) plus total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface on their browsers
Separate circuits for the unit’s power and the power to the devices - the power control status menu is still accessible even when an overload condition trips the devices' circuit breaker
Cumulative load measurement - remote users can view load information in amperes via the GUI on their browsers
On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
Port grouping - perform the same action on a specified group of ports
Current Display for easy current status monitoring
Out of Band (OOB) operation via terminal or dialup connection
Two level (Administrator and User) security
Detachable front panel for convenient rack mounting
UL/TUV approved
Multiplatform support: Windows 2000/XP/Vista, Linux, Unix and FreeBSD.
Network Interfaces: TCP/IP, PPP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, ARP, NTP, DNS, Telnet, 10Base-T/100Base-TX, auto sense, Ping

Housing
Case	Metal
Power
Voltage	110 - 220 Auto Sensing
LEDs
Power On	1 (Blue)
On Line	8 (Orange)
Station ID	2 x 4 Segments (Yellow)
Remote	8 (Green)
Link	1 (Green)
10/100 Mbps	1 (Orange/Green)
Port Selection	8 x Push Button/User Interface
Power Consumption	120V/60HZ/16W or 230V/50HZ/16W
Scan Interval	User Specified: 1 - 255 secs.
Computer Connections
Direct	8
Daisy Chain or Cascading	128
CPU Connectors
Peripherals	1 x DB-9 male
Flash ROM Upgrade	VIA RJ45
Humidity	0 - 80% RH
Power Connections	3 Prong NEMA 15AMP
Daisy Chain	In 1 x DB-9(F), Out 1 x DB-9 (M)
LAN Connection	1 x RJ45
CPU or KVM Connection	Local or Remote
Power Switch	1 x Rocker
Reset Switch	1 x Semi-Recessed push button
Interface	Local/Remote & Manual/User Interface
Security	128-bit SSL Encryption & 2-Level Password Security
Computer Interface	Local or Remote Interface
Console Connectors
Secondary Console	1 x RJ45 (CAT5e)
Encryption	128-Bit SSL

Unit Dimensions
Width	17 in. (43.72 cm.)
Height	1.75 in. (4.445 cm.)
Depth	10.4 in. (26.0 cm.)
Unit Package Dimensions
Width	4.875 in.
Height	12.75 in.
Depth	24.875 in.
Master Carton
Width	15.5 in.
Height	13.75 in.
Depth	25.5 in. (64.8 cm)
Master Carton Qty.	3
Weight
Master Carton Wt.	50.04 lb.
Unit Pack Wt.	15.70 lb.

1x 8-Port Power Over the NET™
1x AC Source Power Cord
8x Power Outlet Power Cords
8x Safe Shutdown Cables
1x PON Cable (DB9 F to DB9 M)
1x Rack Mount Kit (Brackets and Phillips head hex M3 x 8 screws)
4x Foot Pads
1x Software CD
1x User Manual
1x Quick start guide

Part Code:

PN9108U

ATEN PN9108U Power over the NET™

Write a review

30 other products in the same category:

Products from the same manufacturer