StarTech ST122VGAU 2 Port VGA Auto Switch

Condition: New

The ST122VGAU VGA Auto Switcher lets you share a display between two computers and prioritize your VGA signals. The VGA switch features a primary and secondary VGA input port, and automatically outputs the signal from the primary input. When the signal feed connected to the primary input port is cut, the switcher automatically defaults to the video signal on the secondary VGA input port.

Designed for maximum control and versatility, the VGA Auto switcher also offers manual control of connected signals with easy-to-use front panel buttons that allow you to toggle between video sources.

The StarTech Advantage

Auto-sensing technology detects the loss of a signal and automatically switches to the secondary source preventing loss of display
Sharing a single display between two computers saves the cost and desk space of purchasing an additional display

Automatically selects the priority of incoming video signals for display
Supports resolutions up to 1920x1440
Easy to use front panel selection buttons
Easy installation - set up in minutes
Video Bandwidth 250 MHz
Rugged steel enclosure
Supports DDC1, DDC2, DDC2B, DDC2B+, DDC2AB on port 1

Warranty Information
Warranty	2 Years
Hardware
Audio	No
Industry Standards	DDC1, DDC2, DDC2B, DDC2B+, DDC2AB ( DDC Support on Port 1 only)
Ports	2
Performance
Bandwidth	250 MHz
MTBF	80,000 hours
Wide Screen Supported	Yes
Connector(s)
Connector A	2 - VGA (15 pin; High Density D-Sub) Female
Connector B	1 - VGA (15 pin; High Density D-Sub) Female
Special Notes / Requirements
Note	Port 1 is set to have higher priority than port 2 when both signals are on
Physical Characteristics
Color	Black
Enclosure Type	Steel
Product Height	7.7 in [195 mm]
Product Length	5.1 in [130 mm]
Product Weight	32.8 oz [930 g]
Product Width	2.2 in [56 mm]
Power
Center Tip Polarity	Positive
Output Current	0.3A
Output Voltage	9 DC
Power Source	AC Adapter Included
Packaging Information
Shipping (Package) Weight	1.7 lb [0.8 kg]