Lantronix UD1100IA2-01 UDS1100-IAP

Remotely Monitor, Manage and Control Industrial Equipment Over the Net

The UDS1100-IAP is a rugged and powerful tool which enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet.

This single-port Device Server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access.

Standards Based Communications

Using an open Ethernet architecture as a standard provides the flexibility for equipment to communicate to virtually any type of industrial device.

When used in conjunction with an OPC server, most Windows® based HMI, SCADA and PC-based control applications have full access to information in the industrial equipment networked by the UDS1100-IAP.

Extending Serial Communications Across the Globe

Our approach to network-enabling devices is transparent to your attached equipment and software so you won’t need to change the way you work. Using a method called serial tunneling, the UDS1100-IAP encapsulates serial data into packets and transports it over Ethernet. Serial tunneling can be done in multiple ways:

• Using Lantronix supplied Com Port Redirector software, Windows device applications not designed for network communications are re-directed to communicate to devices connected to the UDS1100-IAP.
• Connecting two UDS1100-IAP Device Servers configured to automatically talk to each other over the network creates virtual serial connections that can extend serial communications across a facility or around the world.

Built-in Web Server

The built-in web server enables users to access and configure the UDS1100-IAP from a standard web browser. Web pages enabling the UDS1100-IAP to be customized for unique applications can be built using Lantronix development tools. On-board Flash memory provides room for future system software upgrades and maintenance-free, nonvolatile web page storage.

Easy to Set Up and Use

The UDS1100-IAP can be set up locally through its serial port, or remotely using Telnet or a web browser. The included DeviceInstaller Windows-based configuration software simplifies setup and provides an easy way to:

• Assign IP & other network specific addresses
• Load custom web pages
• Enable web-based configuration of the Device Server
• Ping or query the attached device(s) over the network
• View specific device data files
• Upgrade firmware
• Simplify process of installing industrial protocols

• In minutes, securely connect factory floor devices to enterprise systems
• Access, monitor and control equipment over Ethernet
• Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
• Supports RS-232, RS-422 and RS-485 communications
• Includes Modbus TCP, ASCII, RTU and DF1 protocols
• 15kV serial ESD protection
• Wide -40°– 70°C operating temperature range
• Environmentally-friendly RoHS and WEEE-compliant

Serial Interface

• Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
• Connectors: 1 DB25F DCE serial port
• Data Rates: Software-selectable baud rate from 300 to 230 KBaud
• Characters: 7 or 8 data bits
• Parity: odd, even, none
• Stop Bits: 1 or 2 Control
• Signals: CTS/RTS (Hardware)
• Flow Control: XON/XOFF (Software)

Network Interface

• Interface: 10Base-T/100Base-TX Ethernet port
• Software selectable Ethernet speed 10/100/Auto
• Software selectable Half/Full/Auto duplex
• Connectors: RJ45
• Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP

Indicators (LED)

• Power (green)
• 10/100 Mb Link (amber/green)
• 10/100 Activity (amber/green)
• Diagnostics (red)
• Status (green)

Processor

• CPU: Lantronix DSTNI-EX 48 MHz clock
• Memory: 256 KB zero wait state SRAM, 2 MB Flash

Management

• Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP

Power

• 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
• 9-30 VDC on DB25F serial interface
• 3.3 VDC on serial interface

Part Code:

UD1100IA2-01