Black Box LGC121A-R2 MultiPower Miniature Media Converter

Condition: New

Connect Ethernet, Fast Ethernet, or Gigabit Ethernet copper ports to fiber optic cable.
Autosensing copper ports make it perfect for migrating networks.
Also works as a data rate converter, performing 10-/100-/1000-Mbps speed autonegotiation on the twisted-pair port.

Auto MDI/MDI-X means you never need to worry about what kind of cable to use.
Easy to install. Just plug and play.
Compact size.
Use inexpensive CAT5e twisted-pair cable on the copper side.

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs.

Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC.

Auto MDI/MDI-X means you never need to worry about what kind of cable to use.
Easy to install. Just plug and play.
Compact size.
Use inexpensive CAT5e twisted-pair cable on the copper side.

Cable Requirements	Twisted pair: CAT5 or above, shielded or unshielded; Multimode fiber: 50-/125-µm or 62.5-/125-µm duplex; Single-mode fiber: 9-/125-µm duplex
Environmental	Operating temperature: +32 to +104°F (+0° to +40°C); Storage temperature: 0 to 160°F (-20 to +70°C); Humidity: 5 to 95%, noncondensing
CE Approval	Yes
Connectors	(1) RJ-45, with autocross for MDI-II/MDI-X, (1) pair of SC
Indicators	LEDs: Per twisted-pair port: (1) TX Link/ACT, (1) FX Link/ACT; Per fiber port: (1) XMT, (1) RCV
Power	From the included external 100-240-VAC, 50-60-Hz adapter; From the optional PowerTray (LHC018A-AC-R2) with a 100-240 VAC, 50-60 Hz power supply
Size	0.8"H x 1.8"W x 3.4"D (2 x 4.6 x 8.6 cm)

Part Code :

LGC121A-R2

Black Box LGC121A-R2 MultiPower Miniature Media Converter

Write a review

30 other products in the same category:

Products from the same manufacturer