Black Box LBNC300AE LinkGain Ethernet Extender over Coax

Condition: New

Black Box LBNC300AE LinkGain Ethernet Extender over Coax.

Economically extend Ethernet over coax wiring.

Extends 10-/100-Mbps Ethernet over existing coax cabling.
Use in pairs to extend point-to-point up to 2.6 km at 1 Mbps.
Or transmit at 75-Mbps through 85-Mbps speeds up to 200m.
Take advantage of existing coax to break the 100-m copper Ethernet barrier.
Enables you to repurpose RG-6 coax wiring already installed in a building.
Can be mounted on a DIN rail or on a wall or mount up to 16 extenders in the optional 2U-high, LinkGain Chassis (LB300A-RACK).

Extends the life of your installed infrastructure.
Transparent to higher-layer protocols.
Equipped with Auto MDI/MDI-X port for easy cabling on the RJ-45 side.
Autonegotiates for network speed, transmits data in full-duplex mode.
Ten symmetrical vDSL speeds.
To configure for either local (CO) or remote (CPE) operation, just flip a DIP switch.

Standards — IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x, Ethernet over vDSL
Distance (Maximum) —
On Ethernet port side: 100 m (328 ft);
On Ethernet (VDSL) extender port side: 2.6 km (1.6 mi.)
Connectors —
Ethernet port side: (1) RJ-45 (10BASE-T/100BASE-TX);
On Ethernet (VDSL) extender port side: (1) BNC coax (RG-6/AU)
Indicators —
Unit LED: (1) Power Status (Power);
Port LED: (1) Link/Activity, (1) Fax (full-duplex);
Line LEDs: (1) Error, (1) Link, (1) Local, (1) Remote
Speed Indication LEDs: 1–5:
1 Green: 1 Mbps - Amber 5 Mbps
2 Green 10 Mbps - Amber 20 Mbps
3 Green 30 Mbps - Amber 40 Mbps
4 Green 50 Mbps - Amber 60 Mbps
5 Green 70 Mbps - Amber 75 Mbps
Power — Input: 100–240 VAC, 50–60 Hz, autosensing;
Output: 12 VDC;
Consumption: 5.76 W maximum, 0.48 A at 12 VDC
Temperature (Operating) — 14 to 140° F (-10 to +60º C)
Size — 2.3H x 8.1W x 10.9D cm (0.9"H x 3.2"W x 4.3"D)
Weight — 0.1 kg (0.3 lb.)