Server Technology C-8HF2-C203 Metered FSTS C-8HF2/E 6.6kW - 14.6kW (8) C19 outlets

ServerTech ServerTech

New

The Server Technology Metered Fail-Safe™ provides fail-over redundancy to single or dual-power supply servers and network devices. Exclusive to the Metered Fail-Safe is its ability to carry loads on the A circuit, B circuit or both.

Similar, but unlike a common automatic transfer switch, the Metered Fail-Safe unit is unique in that it contains two (2) in-feeds and two (2) banks of outlets.

For example he "A" in-feed routinely powers just the A1-4 outlets, and the "B" in-feed routinely powers just the B1-4 outlets. However, if the "A" in-feed goes down, the "B" in-feed powers all 8 outlets and the same if the "B" in-feed goes down, the "A" in-feed powers all the outlets.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

This "Fail-Safe" method has several advantages compared to a standard ATS because it does not prohibit load balancing between the two supplied circuits. A standard ATS contains two-in-feeds, but runs all outlets from just one source, with the secondary source only being used once an outage occurs on the capacity. This results in less heat, less resistance, and consequently less of a voltage drop compared to the same load existing on just one source. Only when an outage occurs on one of the two sources will the entire load be applied to a single source.

The Server Technology® Fail-Safe Transfer Switch (FSTS) provides fail-over redundancy to single or dual power supply servers and network devices. Exclusive to the Fail-Safe Transfer Switch is its ability to carry loads on both the A and B circuits during normal operation. Unlike a common automatic transfer switch, the Fail-Safe unit is unique in that the "A" in-feed routinely powers half the outlets, and the "B" in-feed routinely powers the other half. However, if either in-feed goes down, the other powers all outlets. This "Fail-Safe" method has several advantages compared to a standard ATS. A standard ATS contains two-in-feeds, but runs all outlets from just one source, with the secondary source only being used once an outage occurs. The Server Technology design does not prohibit load balancing between the two supplied circuits which results in less heat and a lower voltage drop compared to the same load existing on just one source. Only when an outage occurs on one of the two sources will the entire load be applied to a single source.

Input Power Capacity (kW): 3.3
Input Plug Type: IEC C20 200-240V Inlet
Input Current (A): 20
Input Current Rated (A): 16
Input Nominal Voltage (V): 208
Input Phase: 1-Phase (L-L)
Input Cord Location: Horizontal
Total Outlets: 8
IEC C19 Count: 8

Part Code:

C-8HF2-C203

Write a review

Server Technology C-8HF2-C203 Metered FSTS C-8HF2/E 6.6kW - 14.6kW (8) C19 outlets

Server Technology C-8HF2-C203 Metered FSTS C-8HF2/E 6.6kW - 14.6kW (8) C19 outlets

The Server Technology Metered Fail-Safe™ provides fail-over redundancy to single or dual-power supply servers and network devices. Exclusive to the Metered Fail-Safe is its ability to carry loads on the A circuit, B circuit or both.

Similar, but unlike a common automatic transfer switch, the Metered Fail-Safe unit is unique in that it contains two (2) in-feeds and two (2) banks of outlets.

For example he "A" in-feed routinely powers just the A1-4 outlets, and the "B" in-feed routinely powers just the B1-4 outlets. However, if the "A" in-feed goes down, the "B" in-feed powers all 8 outlets and the same if the "B" in-feed goes down, the "A" in-feed powers all the outlets.